Features of the Trident P2 Mask
 
- Utilising advanced multilayer technology, this system offers protection against a range of mechanically and thermally generated particulates, encompassing fluids, dusts, mists, fumes, and smoke.

The three-panel design ensures structural strength, a secure fit, and maximum comfort. Each panel and seam of the mask has undergone independent testing and meets the standards set by AS 4381:2015 – ISO 22609.
 
    Bacterial Filtration Efficiency (BFE) >99%
    Fluid resistance level 3, 160 mmHg
    Proprietary adjustable foam nose pad to ensure consistent optimum facial seal and reduce fogging of eyewear
 
Our exclusive adjustable foam nose pad ensures a consistently optimal facial seal, minimising fogging of eyewear. With a versatile unisex fit, it accommodates a wide range of facial shapes and sizes, making it effective for individuals who are traditionally hard to fit.

Featuring a specialised TRIDENT® respirator seal, it achieves unparalleled PortaCount® fit testing results. Its low breathing resistance enhances wearer comfort, durability, and the product's lifespan.

Designed to complement other mandatory personal protective equipment, it is latex-free for broader usability. Each mask is individually batch numbered and packaged to ensure traceability, portability, and hygiene.
 
The Trident Mask P2 is Certified to:
AS/NZS 1716: 2012
ID No. BMP 732382
AS 4381: 2015 Level 3, 160 mmHg
ID No. BMP 737354

The Trident P2 Mask is not currently commercially available at Bunnings Hardware stores, and can be purchased directly through Fit Test Australia 

N95 Mask Fit Check List For Trident P2 Mask
If air escapes from the nose or cheek regions, adjust the foam nose seal until a proper seal is obtained. 
Should air leakage occur around the respirator's edge, adjust the head straps and reposition the mask until a secure seal is achieved. 
A successful fit check is indicated by the absence of air leakage. 
Always conduct a fit check before entering the work area. 
If a successful fit check cannot be achieved, remove and refit the respirator. 
If you are still unable to achieve a successful fit check, refrain from entering the work area.
 
Before Using an N95 Respirator
Prior to using your disposable respirator, it is imperative to conduct a fit check. 
Always familiarise yourself with the disposable respirator wearer instructions.
If air leakage occurs at the edges of the respirator, adjust the fit to eliminate leakage and then perform the fit check as described above. 
Similarly, if air leakage occurs around the nose, adjust the foam nose/cheek support strip to eliminate leakage and conduct the fit check accordingly. 
If achieving an appropriate fit and seal proves challenging, refrain from entering the hazardous environment and adhere to on-site policies referencing AS/NZS 1716: 2012. 
 
Please note that the end user is responsible for determining the suitability of this product for use in their specific conditions and applications. Sample trialing is recommended and encouraged.
 
NOTE: To achieve an optimum facial seal, the wearer should be clean-shaven. It is recommended the wearer be fit tested prior to use in accordance with AS/NZS 1715: 2009 and/or onsite requirements. Training on the safe use and limitations of the disposable face mask must be performed in accordance with AS/NZS 1715: 2009 section 2.4.